Robertson Trading Post Grips and Stocks

Grips and Stocks for Handguns, Rifles, and Shotguns

Updated 09/18/08

Coins

Guns

Collectibles

Robertson Trading Post

117 Front St

PO Box 365

Henderson, Tennessee

38340-0365

john @ robertsontradingpost.com

731-989-7641

Our internet phone hours are 8:30 to 4:30 Mon – Sat. Answering machine is not reliable, but our e-mail is reliable.

In business since 1952

NRA Dealer of the Year 1993, 1995, 1997

Thanks for looking over our pistol and revolver grips. Individual Item format is Stock #, then Heading, then Photo, then description and price. Shipping rate information is at the bottom of this page. We have grips grouped by Gun Brand.

We are not big dealers, no bigger in most cases than your own friendly neighborhood gun shop. We do, however, try our best to obtain and stock items you don’t normally find many of in most gun stores, nice older guns from the 20^th Century. Demand for replacement wood grips for Colt, Smith & Wesson, Ruger, and even Charter, Taurus, and Rossi revolvers has never been stronger.

We also are interested in buying or trading for nice, older wood – or pearl, stag, whatever – grips for Smith & Wesson and Colt handguns. To some extent, too, we’re interested in wood or decorative grips for Tauruses, Rossis, Charters, and Rugers. Bear in mind, please, if you offer to sell to us or trade to us how labor intensive that internet listing is.

See our other pages for:

Smith & Wesson Grips Colt Grips

Buyers please look for grip screws taped inside one of the grip panels on revolver grips when you receive your shipment. Two of our buyers have thrown away their screws, but happily they found them. This seller, to top that, once threw a Beretta 21 out with some supposedly-empty shipping cartons – but found it!

AMT
Browning
Charter Arms
Harrington and Richardson – H&R
High Standard
Jennings & Bryco
Raven
RG – Eig – FIE
Rossi
Ruger
Sig Sauer
Taurus
Thompson Center
Remington - Mossberg, Mixed Lots and Long Gun Stocks
Walther

AMT – Arcadia Machine Tool Company Pistols

GRAMT380 A – J

Grips AMT .380 Back-Up Walnut Stained NIB

Photo shows two sets of genuine AMT grips for the AMT .380 Back-up only. These appear to be walnut; but at least they are walnut stained. They will only fit the Back-Up model .380 manufactured by Arcadia Machine Tool in the 1970s through early 1990s, the single action variants with grip safety. We have no idea whether they will fit any currently produced models if indeed there are any being produced in Texas, see Fjiestad’s note on page 117 of the 2007 Blue Book. Photo shows a couple pair that we removed from their aging paper wrappers after we found them in an old Southern Warehouse recently. Own one of the sets in the photos, or a set of their identical mates for only $ 19.95 These will easily ship for only $3.50 USPS First Class Mail.

Beretta

GR92FSW

Grips Beretta 92 Cocobolo NIB

Photo shows two sets of only a few fancy Cocobolo grips for the Beretta 92FS we were able to obtain recently. These are brand new in their factory packaging, marketed by Target Sports, and that is all the marking there is on their packages. These will fit, of course, any Beretta 92 made since the early 1980s, so long as it is a full size grip frame; they will also fit most 96 Berettas. Own one of the sets in the photo, or their identical mates for only $ 39.95

GRS92

Grip Screws Beretta 92/96 Flat Head Factory NIB Set of 4

For those of us who resist change and adhere to tradition at every opportunity, even when the Beretta has earned our grudging respect after 25 years, we recently acquired factory Beretta sets of replacement grip screws for all 92 or 96 type Berettas. These are slotted, not hex head screws. Made for people who know how to hold a screwdriver. These are brand new Factory Beretta screws in their original factory package. Own a set of four for one low total price of only $ 6.95

Browning

GR106

Browning Grips for Baby Browning .25 Exc Belgium

Here is a set of factory Browning Grips for the Baby Browning .25 Auto, complete with their screw and right panel escutcheon. These are in Excellent condition with no conspicuous detractions whatsever. The screw has about 90 percent of its blue left, with very mild stress indications to the slot. The right side male point of the screw shows some white, but the escutcheon in the right panel shows no wear. We rate these grips as Excellent, 90 to 95 percent finishwise; but photos should suffice for interested parties to judge finish grade for themselves. Own this set of genuine FN Belgian Browning grips for only $ 59.95

GR107

Browning .25 Grip Panel RH Only VG 1960s

This is the replacement panel that is most apt to break, the right one, for the very popular and sadly discontinued Belgian Browning .25 Auto, the Baby Browning. This panel is in Very Good Codnition, with moderate scuffs on its sharp edges and on the edge of the brand logo circle, as the photos show. We’re offering it for only $19.95

Charter Arms

GR037

Charter Revolver Grips Pachmayr CHA-S NIB 1970s

This is a pair of NIB Charter Pachmayrs, CH-A-S-BLK made in the late 1970s or early 1980s. The standard unmarked Presentation grade grips were the only offering for Charters at the time; the Charter Compacs came a bit later. Own this period set complete for only $ 21.95

Harrington & Richardson

- none in stock at present

High Standard

GRHS01

Grips High Standard .22 Auto 1960s Exc w/Logo

Here is a set of genuine factory High Standard plastic grip panels for Sport King, Flite King, and Dura-Matic Pistols – and perhaps other models – manufactured some time during the 1960s by our estimate. We consider them to be in Excellent Condition, with about 90 percent of their original glossy finish remaining. Photos should be clear enough, however, for interested parties to judge finish grade for themselves. These grips have no conspicuous surface detractions. There is minor scuffing to the smooth areas of both panels, but nothing serious. Note that the logos are solid brass with sharp details and have very attractive light toning. As the photos show, these do not have grip screws. Own this irreplaceable set of High Standard Grips for only $ 69.95

GRHS02

Grips High Standard .22 Auto 1950s - 60s Exc

Here is a set of genuine factory High Standard plastic grip panels for Sport King, Flite King, and Dura-Matic Pistols – and perhaps other models – manufactured some time during the 1960s by our estimate. We consider them to be in Excellent Condition, with about 90 percent of their original glossy finish remaining. Photos should be clear enough, however, for interested parties to judge finish grade for themselves. These grips have no conspicuous surface detractions. There is minor scuffing to the smooth areas of both panels, but nothing serious. Note that the entire screw assembly is intact and included. While the screw and escutcheon heads show some wear and rust residue, there is no stress evidence to their slots. Own this irreplaceable set of High Standard Grips for only $ 69.95

Jennings

GR205

Bryco Model 48 Grips Factory Mint with Screws

Here is a prize worth more than one of the guns, a set of factory Bryco grips for the Bryco model 48 .380 Auto. We are unclear whether these will fit the current descendants made by High Point. The grip screws are a definite plus. Own this mint condition set of grips and four brand new grip screws for only $19.95

GR026

Jennings J-22 Grips Factory Laminate Excellent Cond

This set of laminated grips fits the now-defunct Jennings J-22 Pistol. They are in Excellent Condition with no conspicuous surface detractions, about 90-95 percent of their original finish remains. Own them for only $ 29.95

Raven

GR031

Raven MP-25 Grips Walnut .25 Auto VG Cond

This set of walnut grips fits the now-defunct Raven MP-25 Pistol in .25 Auto Caliber. They are in Very Good Condition with no major surface detractions, certainly no cracks; and about 70-75 percent of their original finish remains. Own them for only $ 26.50

RG – Rohm Gensontheim – RG Industries, Miami, FL. Also Eig Cutlery

GR039

RG 38 Grips Vintage Jay Scott Pearl NIB Cond 1970s mfg

Indeed this set of imitation pearl grips is still new in its original box, but these were manufactured some time during the 1970s. They have some nice yellowish toning due to their age. The box is somewhat frayed and shelfworn, but any of us would be too if we sat there for 30 years like these have. These fit the RG 38S and similar square butt RG Revolvers, including the RG 39 and RG 40. They will not fit the round butt RG 31 and RG 30. Box end reads: Laminated White / 59 / Rohm – RG 38 / Square Butt. This set, #039, has its factory guarantee insert, even though it’s wadded up. The insert paper is quite collectable, it is a guarantee that Jay Scott Armarc Grips Are Guaranteed Unbreakable, and the bottom of the certificate is signed: Colt Firearms Div., 35 Market St., Elmwood Park, N.J. 07407. These are, as the label says, imitation Pearl mounted on sturdy laminate for durability and strength. Own this fine set of Scott grips for only $49.95

GR040

RG 38 Grips Vintage Jay Scott Pearl NIB Cond 1970s mfg

GR212

RG 14 Grips 1960s-70s Round Butt Exc

Here is a very nice set of replacement grips for the plentiful RG 14 Revolvers, marketed through Eig Cutlery, then FIE Corp, then RG Industries, in the 1960s and 1970s. These grips are intcact and complete with their grip screw and with its nut on the right panel. Screw and nut are excellent with only negligible wear and stress. These grips are Excellent, with no conspicuous scuffs or scratches. They have moderate scuffing in three places on the butt area of the left panel, and less visible contact evidence on the right panel. These grips will only fit the earlier RG 14. If your RG 14 has a knurled, rounded end cylinder rod that unscrews, then they will fit. If yours is an RG14S, with the cylinder rod that pulls straight out with no screw rotation, these will NOT fit. Own this fine set of RG Grips for only $39.95

Rossi

GR004

Grips Garcia Rossi Target Thumbrest 1960s Mfg VG Cond

These are authentic old-style target grips with the diamond center and Rossi logo, heavy plastic, manufactured in the 1960s. They fit round butt, J-frame Copy Rossi Revolvers manufactured from the 1950s up to the late 1980s. Shelfwear scuffs affect about 20-25 percent of their surface area by our estimate, and there appears to be some spreading between the panels on their butt end. These are, however, appropriate period grips for Firearms International and Garcia Imported Rossi Revolvers from the 1960s and 1970s. Own the pair in the photo for only $ 14.95

GR005

Grips Garcia Rossi Target Thumbrest 1960s Mfg VG Cond

GR006

Grips Garcia Rossi Target Thumbrest 1960s Mfg Exc Cond w/o Screw

These are authentic old-style target grips with the diamond center and Rossi logo, heavy plastic, manufactured in the 1960s. They fit round butt, J-frame Copy Rossi Revolvers manufactured from the 1950s up to the late 1980s. Shelfwear scuffs affect 10 percent or less of their surface area by our estimate, and there appears to be some spreading between the panels on their butt end. This pair is missing its center screw. These are, however, appropriate period grips for Firearms International and Garcia Imported Rossi Revolvers from the 1960s and 1970s. Own the pair in the photo for only $ 9.95

GR007

Grips Garcia Rossi Target Thumbrest 1960s Mfg Exc Cond w/o Screw

These are authentic old-style target grips with the diamond center and Rossi logo, heavy plastic, manufactured in the 1960s. They fit round butt, J-frame Copy Rossi Revolvers manufactured from the 1950s up to the late 1980s. Shelfwear scuffs affect 10 percent or less of their surface area by our estimate, and there appears to be some spreading between the panels on their butt end. This pair is missing its center screw. These are, however, appropriate period grips for Firearms International and Garcia Imported Rossi Revolvers from the 1960s and 1970s. Own the pair in the photo for only $ 9.95

GR009

Garcia Rossi With Target Weight Exc Cond

These are authentic old-style target grips with Rossi logo, heavy plastic, manufactured in the 1960s. They fit round butt, J-frame Copy Rossi Revolvers manufactured from the 1950s up to the late 1980s. This set has the metal weight in the bottom of the grips for added stability. Shelfwear scuffs affect 10 percent or less of their surface area by our estimate, and there appears to be only slight spreading between the panels on their butt end. This pair is missing the main screw but still has the lower stud screw. These are, however, appropriate period grips for Firearms International and Garcia Imported Rossi Revolvers from the 1960s and 1970s. Own the pair in the photo for only $ 9.95

GR012

Grips Garcia Rossi Target Thumbrest 1960s Mfg Exc Cond

These are authentic old-style target grips with Rossi logo, heavy plastic, manufactured in the 1960s. They fit round butt, J-frame Copy Rossi Revolvers manufactured from the 1950s up to the late 1980s. This set has the metal weight in the bottom of the grips for added stability. Shelfwear scuffs affect 10 percent or less of their surface area by our estimate, and there appears to be only slight spreading between the panels on their butt end. This pair has both its screws. These are, however, appropriate period grips for Firearms International and Garcia Imported Rossi Revolvers from the 1960s and 1970s. Own the pair in the photo for only $ 19.95

GR013

Grips Garcia Rossi Target Thumbrest 1960s Mfg VG Cond

These are authentic old-style target grips with the diamond center and Rossi logo, heavy plastic, manufactured in the 1960s. They fit round butt, J-frame Copy Rossi Revolvers manufactured from the 1950s up to the late 1980s. Shelfwear scuffs affect about 20-25 percent of their surface area by our estimate, and there appears to be some spreading between the panels on their butt end. This set has both screws; the main screw is taped inside the left panel, our normal mode of shipping. These are appropriate period grips for Firearms International and Garcia Imported Rossi Revolvers from the 1960s and 1970s. Own the pair in the photo for only $ 16.95

GR014

Grips Garcia Rossi Target Thumbrest 1960s Mfg VG Cond

These are authentic old-style target grips with the diamond center and Rossi logo, heavy plastic, manufactured in the 1960s. They fit round butt, J-frame Copy Rossi Revolvers manufactured from the 1950s up to the late 1980s. Shelfwear scuffs affect about 20-25 percent of their surface area by our estimate, and there appears to be some spreading between the panels on their butt end. This set has both its screws. These are, however, appropriate period grips for Firearms International and Garcia Imported Rossi Revolvers from the 1960s and 1970s. Own the pair in the photo for only $ 16.95

Ruger

GRgr001 A - J

Grips Ruger Blackhawk Sgl 6 Walnut Target NIB

Photo shows two representatives of genuine Italian Walnut Target Grips to fit the Ruger Blackhawk, Vaquero, or Single Six models currently in production. These will not fit the Super Blackhawk, or other Rugers made before 1975. Note the moderately protruding finger and thumb rests from either side. These grips are ambidextrous, attractive, and highly functional, a definite asset to otherwise plain-looking revolvers. These were manufactured in Italy for Sile Distributors in New York, a very active company in the 1980s and 1990s market, and still there today. These particular grips are from an old Southern Warehouse where we found only a few sets recently. Own the ones in the photo, or one of their identical mates for only $ 21.95 Single Sets will ship for flat $3.50, USPS First Class Mail.

GRgr002 A - J

Grips Ruger Super Blackhawk Sgl 6 Walnut Target NIB

Photo shows two representatives of genuine Italian Walnut Target Grips to fit the Ruger Super Blackhawk with Square Trigger Guard, models currently in production. These will not fit the regular Blackhawk grip frame revolvers, or other Rugers made before 1975. Note the moderately protruding finger and thumb rests from either side. These grips are ambidextrous, attractive, and highly functional, a definite asset to otherwise plain-looking revolvers. These were manufactured in Italy for Sile Distributors in New York, a very active company in the 1980s and 1990s market, and still there today. These particular grips are from an old Southern Warehouse where we found only a few sets recently. Own the ones in the photo, or one of their identical mates for only $ 21.95 Single Sets will ship for flat $3.50, USPS First Class Mail.

GRgr003

Grip Ruger Target Security Six Mint 1980s Walnut

Here is a set of grips that came off a Ruger Stainless Security Six some time during the Reagan era, and some of our fellow Tennesseans replaced them with Rubber. These are genuine American Walnut, stainless screw and escutcheon, original factory Logo with the Ruger Phoenix. They are in mint condition; they have not been used, and there are no surface detractions anywhere. Own this fine set of original classic Ruger Grips, from the days when their revolvers had a real square butt grip frame, for only $ 39.95

GR016

Grips Ruger Redhawk Pachmayr VG-Exc 1980s

This is a really nice set of Pachmayr Presentation grips for any Ruger Redhawk. Not the Super Redhawk, mind you, because the Super Redhawk doesn’t really have a grip frame, just a big ugly stem. This is for the classic Magnum Rugers, like the blue 5 ½ inchers we keep in stock brand new, because they’re such a good buy at $619.95. The blues look good, but a pair of these Pachmayrs really helps soak up some of the blast when a person actually fires one. Replacement price on these in our area is over $30.00; we’re offering this set, however, for only $ 19.95

GR019

Grips Ruger Security Six Factory Walnut Exc SS Screws Early 1980s Mfg

This set of factory Ruger grips fits the Security Six Revolver, any of them made after December of 1974. They are the standard magna style, and are in Excellent, Near Mint, condition. The right panel is missing some stain on its butt portion, but we believe that is original to this set of grips. Own this long-discontinued set of Ruger grips, complete with its original Stainless screw hardware, for only $ 21.95

GR020

Grip Ruger Blackhawk Left Panel Factory Walnut New Model VG

We advertise the left panel only, because the right panel – included – is broken at the front stud area. This set fits any Ruger new model Single Six, Vaquero, or Blackhawk. It will not fit old models made before 1974, nor will it fit the Super Blackhawk. Own this serviceable walnut panel and its damaged mate for only $ 11.50

GR021

Grips Ruger Super Blackhawk Sile Italian Walnut Exc 1980s Mfg

We sold a good many Sile grips in their heyday, the 1970s and 1980s, and this is likely one of the sets we sold during those days. This is a set of Sile import, Italian walnut, double thumbrest oversize target grips for the Ruger Super Blackhawk. The only detractions are some inconspicuous contact evidence along the edges of the front and backstrap areas. We consider that they have 90 to 95 percent of their original finish intact, qualifying them for the designation NRA Excellent. This particular set came from our old friend Tony Law at Woods & Water in Tuscaloosa, Alabama, back during that time period, because we removed his price sticker that was still attached. Grips like these command prices of $100 or more if a person can locate any; but we’re offering this set for only $ 19.95

GR022

Grips Ruger Redhawk Pachmayr RHK NIB Condition 1980s Mfg

This is an old style set of Pachmayrs for the Ruger Redhawk. They are pre-logo, that is, they were manufactured before Pachmayr began putting its factory lion logo in their grips in the late 1980s. These are still in their original box, and they still have their original powdery residue that is 25 years old, perhaps older. These came from a collection we recently bought. When we got them, they did not have a screw, so we inserted a used Pachmayr screw from a damaged set of N Frame Smith & Wesson Pachmayrs that we had, so that is the only unoriginal and non-mint part – the grip screw. This set of grips will match well with the early stainless Redhawks that Ruger began delivering in the early 1980s, or they are simply collectable in their own right. Current pricing in our area on Pachmayr grips approaches $40 a set, but we’re offering this mint, vintage set of Pachmayr RHK grips for only $ 24.95

GR023

Grips Ruger Mark II Hillbilly Custom Rosewood

These may not be bona fide rosewood, but one of our fellow hillbillies from adjacent McNairy County did a pretty good job whittling these out for his Mark II Ruger. The roughest part is the slide release cut. Font is carefully scribed, the word Ruger in what we call Roy Rogers font on the right panel, and Mark II on the left one, with glossy finish over them. Encourage Hillbilly craftsmanship; own these for only $ 16.50

GR024

Grips Ruger Vaquero / Bkhwk / Sgl-6 Laminate Blem

This set fits any Ruger new model Single Six, Vaquero, or Blackhawk. These are stock factory grips that one sees on Ruger Vaqueros and Stainless Super Single Sixes, made by Ajax for Ruger. Other than a tiny chip of the rear lower edge of the right panel, they are excellent. Own this fine set for only $ 14.00

GR027

Grips Ruger Speed Six RB Herretts Shooting Star Walnut NIB Condition

This particular set, like some others we recently acquired, came from our old friend Tony Law at Woods & Water in Tuscaloosa, Alabama, back during the 1970s and early 1980s, because we removed his price sticker that was still attached. This set of genuine Herrett’s Shooting Stars grips for the Ruger Speed Six New Style Round Butt Frame, wording straight off the box label, is in its original box with its tissue paper and we have left the Woods & Water sticker attached. Shelfwear has only inflicted one tiny mar on the checkering of the right grip panel, directly above the screw escutcheon. Own this extremely scarce, mint set of Herretts for only $ 49.95

GR028

Grips Ruger Super Blackhawk Herretts Shooting Star Walnut Mint Cond

This set of genuine Herretts Walnut Shooting Star target grips for the Ruger Super Blackhawk came from a collection in our Sister State of Mississippi where they have been sitting at least since the early 1980s, perhaps earlier. This set still has its factory spacer intact and factory label attached to the inside of the left grip panel. Shelfwear or handling has inflicted only 2 very tiny, inconspicuous pecks that we can find. These grips nevertheless retain 99 percent of their original finish. The grip screw shows no stress indications whatsoever. The price tag residue on the butt is from Woods & Water in Tuscaloosa, Alabama, where these were shipped out wholesale under Mr. Tony Law’s management. Own this very desireable set of Herretts Target Grips for the Ruger Super Blackhawk, collectable in their own right, for only $ 39.95

GR029

Grips Ruger Security Six Eagle Rosewood Tiger Scene OS NIB

This set of genuine Rosewood grips were hand carved in India and marketed in the United States by Eagle Grip Company in the early 1980s. This is an oversize set of target grips, New in Box Condition, that fits the Ruger Security Six Revolver, square butt. The box and all its papers and wrappers are completely intact, and the brass screw has never had a screwdriver put in it since these arrived in the collection in the early 1980s, where they sat until we bought them recently. They sold for $65.00 over 25 years ago. We’re offering them at only a slightly inflated price over their original sale price. Own this excellent set for only $ 49.95

GR030

Grips Ruger Security Six Mustang Combat Target NIB 1970s

This is a New in Box set of grips for the Ruger Security Six Revolver, and its label is instructive to Ruger fans: All models manufactured after Dec. 1974 and having serial numbers with the prefix #151. Any Security Six, then, with a serial number prefix of 151 or higher take the newer style grips. The word new, though, is misleading, because the GP100 Revolver supplanted the Security Six, Speed Six, and Service Six Rugers in the late 1980s. From our knowledge of the collection that this set of grips came from, they are over 25 years old, yet still new in the box. The brass screw head has some greenish toning, but no stress indications. These have never been mounted on a revolver. The box still contains its Mustang Company advertising brochure and, interestingly, a Riverside, California newspaper piece from 1978. These grips, then, are not only a beautiful set of walnut combat finger-grooved handles for one of the most durable revolvers ever made, they are collectable in their own right. They sold new in 1979 for $29.00. We’re offering them for a price only mildly inflated 28 years later. Own this set for only $ 46.50

GR032

Grips Ruger Security Six Pachmayr RS6-L Presentation Mint in Box 1970s Mfg

This set of Pachmayr Presentation grips has its original box with the Smith & Wesson 39 and 59 Pistols on the side. From our knowledge of the collection they came from, and from where they have been for the past decades, we estimate they were manufactured no later than the early 1980s. While the grip screw head has some light rusty spotting, the grips themselves are still covered at places with their original powdery residue. This set of Pachmayrs fits any Ruger Security Six square butt revolver manufactured after 1974 with a serial number prefix of 151 or higher – most Security Sixes. Current pricing on Pachmayr Signature grips is upwards of $50 per set. We’re offering this set of RS6-L, however, mint in their box and collectable in their own right, for only $ 21.95

GR064

Grips Ruger Security Six Herretts SS Exc w/o Screw

This set of vintage Herretts grips fit the Ruger Security Six Revolver, any model made after 1974; and they are in excellent condition. All they lack is the screw. From our knowledge of the collection these came from, they were manufactured some time in the late 1970s or early 1980s, and are American Walnut. They have the factory sticker inside the right panel, and do not appear to have ever been used. Own this excellent set for only $ 19.95

GR099

Grips Ruger Security Six Walnut Repl. VG

Since the screw escutcheons on this set of factory grips appear stainless, they probably came off a stainless Security Six Ruger. They are in Very Good Condition by our estimate. As usual for service revolver grips, the right panel shows more surface wear than the left one. There are, however, no cracks anywhere. Own this serviceable set for only $ 16.50

GR106

Grips Ruger Mark II .22 Factory Excellent Condition

This set of panels are in excellent if not near-mint condition. Inside of right panel is marked A-8R, left is A00801-L. These fit the Mark II Ruger .22 Pistols, note the slide release lever slot in left hand panel. Own them for only $ 14.95

GR151

Grips Ruger P-85 Type Factory Replacement 1980s Mint

This set of factory grips for the Ruger P-85 also fit most large size Ruger autos in 9mm, .40, and .45. This is an older set, among the first produced; and the P-85 they came off of was manufactured in 1989. Own them for only $14.95

Sig-Sauer

GR051

Grips Sig Sauer P-226 Hogue Rubber VG

Hogue’s rubber grips for the Sig Pistols never come with screws, because they use the same screws that the pistols come with. Hogue grips add maximal controllability with minimal width increase for comfort and control under sustained firing. This set is in Very Good Condition, fully serviceable with no detractions beyond minor scuffing. Own them for only $ 16.95

Taurus

GR085 A - J

Grips Taurus Pearl for Model 85s No Screw

These grips are brand new, factory Taurus, imitation pearl finger-grooved grips to fit most all Model 85 size Taurus Revolvers. Photo shows one of the six sets we were able to get our hands on at press time. These do not have grip screws, but we are raising Cain about that with the company. Own a set for only $ 26.50

GR033

Grips Taurus Gaucho Jay Scott White Pearl NIB OM Ruger Modified 1970s

At press time, we are down to the last two pair of a treasure trove we found in one of our old friend’s store in Mississippi last summer. These are Vintage 1970s Jay Scott Imitation White Pearl Grips to fit the Old Model Ruger Blackhawk and Single Six made before 1975. They are in mint condition, and are collectable in their own right since they have a ca. 1971 Colt Industries Guarantee Certificate, and are still in their original box. Jay Scott number is 24, both on the box and inside the grip panels themselves. The box is factory ink-marked Laminated White Pearl. Another old friend, one of our favorite USAF Vietnam Vets, modified these simply by drilling a shallow indentation so that the Taurus Gaucho’s grip stabilizer pins would fit. The Gaucho grip is otherwise identical dimensions to the grips for the Old Model Blackhawks and Single Sixes. These are, to quote the late Jack Palance, Very Sexy on both the Stainless and Blue Gaucho. Own this fine, attractive and historic set of grips, with their original box and papers, for only $ 49.95

GR049

Grips Taurus N-Size Square Butt Revolvers .44 Etc. Exc.

We honestly do not know whether the grip frame on current production Taurus Large Caliber Revolvers like the Raging Bull are round butt, like their current Smith & Wesson archetypes; or square butt. At any rate, this set of factory Taurus Goncalo Target Stocks dates from the 1980s, or perhaps 1990s; and they will fit the Large Frame, N-frame copy, Taurus Revolver. This set is in Excellent Condition, with no surface detractions other than 3 or 4 small pecks on their butt end. Own this hard-to-find set of grips for only $ 59.95

GR054

Grips Taurus 945 Std Factory Mint

This is simply a set of factory replacement grips for the Taurus 945 Auto, marketed following after its archetype, the Smith & Wesson 4500, during the early 1990s. Both panels are in mint condition, but the right panel has a bow in it that the photo does not show. Own them for only $ 9.50

GR080

Taurus Grips for Models 80/82 etc. Goncalo Exc Cond

This is a set of the old style, Goncalo Alves Taurus Service Grips for their K- frame, square butt copies, Models 65, 66, 80, 82, and 84, etc., produced some time in the late 1970s or early 1980s. Their only detraction is a small pin hole next to a natural wood knot at the base of the left panel, and we believe it is original to the grips. 95 percent or more of their original finish remains. They do not have a grip screw, but both the escutcheons are intact. The Taurus Brasil bull-head logo is intact on both grips, and has a nice yellow-toned matte looking finish. Own this set of Taurus grips for only $ 29.95

Thompson Center

GR113

T/C Contender Forend Super 14/16 Exc Walnut

This fine Thompson/Center forend came to us from one of our Mississippi trader friends with an assortment of similar treasures. This forend is in Excellent Condition with no conspicuous detractions to its satin finished walnut. The only detractions that we notice are mars on the rear left side and bottom edges, and three light indentations near the schnabel. Note the nice figure in this particular piece. This forend has two screws, so it is made for Super 14 or Super 16 barrels. Own this fine walnut forend for only $ 26.50

GR114

T/C Contender Hunter Walnut Grip VG-Exc

Here is a genuine Walnut Hunter style finger-grooved grip for the Thompson/Center Contender pistol. This grip is complete with its butt plate and all three screws, but it has no main screw. Detractions range from very light scuffs to a mar on the lower left edge that slightly penetrates the finish. We estimate that 85 to 90 percent of the original satin finish is intact. Own this fine grip for only $26.50

Remington

GRasst01

S&W / Rossi Grips Lot of 6 Fair – Exc

Winning buyer gets all 6 sets in the photo. There are a couple of fair to Good Michaels Grips for S&W K Frame, one Hogue grip fair for S&W 6900 type, and three sets for old style Rossi 68 Revolvers. Both Michaels Revolver grips have their screws, but none of the Rossi Grips do. Two of the Rossi grips are in Excellent Condition but lack screws, and one set of Rossi grips, as the photos show, have a broken right panel and a damaged left panel. Own this entire collection for only $ 19.95

Stk001

Rem 870 Walnut Corncob Set Stock, FE VG-Exc 1967

This genuine American Walnut buttstock and forend came off a Remington 870 Wingmaster we had that was made in 1967. There is some light scouring and scuffing on the surfaces, but nothing major. Note a slight wood pull next to the swivel stud in the buttstock. We rate this set as 85 percent finishwise, but have included sufficient photography for interested parties to be able to judge finish grade for themselves. Many of us refer to this type forend as Corncob; the real corncob forends, however, were much smaller. Own this fine set for only $ 99.95

Stk002

Mossberg 500 Buttstock Youth Length VG with Pad

Overall length on this Mossberg birchwood buttstock is 12.5 inches including the pad, or 11.5 inches without it. We estimate that it has about 85 percent of its original finish remaining, no cracks, and well-fitted recoil pad complete with screws. It will fit both 12 and 20 gauge model 500s, but not the .410 ga. Own it for only $ 24.95

Stk011

Walnut buttstock for Winchester 50 Auto, Damaged

This damage was deliberate and idiotic. This buttstock fits a Winchester Model 50 Auto. We’re unclear what gauge it is for, but it appears to be a 12 gauge. There is perhaps 50 percent of the original finish left. That is not, however, the key issue here. The issue is how much of the stock itself is left. There has been a substantial amount planed off the cheekpiece area, probably for a recoil-softening cheekpiece for a youth. Overall length is 11 ¾ inches. While damaged from custom work, this is still Walnut and has some potential for use. Own it for only $9.95

Stk013

Buttstock for Bushmaster Pistol Class III if Same Premises

One of our officionados opined that it is for the now-discontinued Bushmaster Pistol, in which case a person would need to be a Class III dealer or have the proper papers for his Bushmaster before he kept it on the same premises. We have nothing of the sort on our premises, nor do we intend to have one. There appears to be 90 to 95 percent of the original finish remaining. We are unclear whether a person needs any more parts to install this buttstock, and we don’t really care to learn. We’re offering this stock to any eligible customer not impeded by local or state prohibitions like California’s, for only $19.95

Walther

GR115

Walther PP or PPK/S Grips Exc

These genuine Walther replacement grips are in Excellent Condition, and they are complete with their original blue steel screw and nut. We estimate that they are Interarms era production. They have no significant surface detractions on either panel. These will fit models PP and PPK/S; they will not, however, fit the PPK because it is shorter. The screw head shows very mild stress and some weakness to its head finish, but the nut is complete with its bluing. Own this fine pair of replacement panels for only $ 26.50

We accept Mastercard and Visa on a phone- or fax-in basis; we’re low-tech. 2% Discount for USPS Money Orders. No need to fool with non-USPS Money Orders: personal checks may involve up to 7 day hold of merchandise for shipment, non-USPS Money Orders or Bank Checks a bit longer, because there are so many bogus ones floating around.

Tennessee Residents add 9-3/4% Sales Tax. No sales tax on items delivered outside the State of Tennessee.

Shipping Charges: $3.50 for First Class Mail on small items, Delivery Confirmation included – under 1 pound. $6.00 flat fee shipping for USPS Priority Mail. Shipping charges max out at $10.00, so long as we can fit all items into a 6”x8”x11” Flat Rate Priority Mail Box. It takes several grips to mount up to more than 2 pounds, the flat rate on $6.00 priority mail, so add-ons don’t usually increase the shipping charges. Add $1.25 per $100 value for insurance if desired. We recommend insurance on orders over $100.00. We require it on orders over $500.00.

back to home page