|
Coins Guns Collectibles |
Robertson Trading Post 117 Front St PO Box 365 731-989-7641 Fax # upon request |
In business since 1952 NRA Dealer of the
Year 1993, 1995, 1997 |
Thanks for visiting our webpages, and
specifically our gun leather page. We try our best to buy genuine leather or
higher-grade holsters; and we are presently closing out our nylon and cordura
products.
We
do buy or trade for singles or lots of genuine leather holsters,
Format: Stock
Number, Product Name, Photo, and Description.
Shipping information
is at the bottom of this page.
GL230-239
Holster Conceal LH
S&W/Taurus 4 in K J-P NIB
Shoppers please note that this is a LEFT HAND Holster. It is genuine leather, un-lined. Winning buyer gets the holster in the photo or one of its 9 identical mates that we had in stock at press time. They are in their original factory package with bar-coded labels,
Style # : 6 A Triple Slot
Desc: Pancake Holster
Fits: Most Size 4” K Frames
These will fit,
then, Smith & Wesson Revolvers such as models 10, 12, 13, 15, 19, 65, 66,
67 and so forth for Left-Handed shooters. They will also fit similarly
proportioned Tauruses and Rossis; not only the Taurus 66 / 608 type, but also
the Big Bore Trackers. These are brand new holsters, and we’re offering them
each for only $ 24.95
GL136-175
Holster G&G
S&W/Taur/Ruger Conceal VG
Winning buyer gets one of the holsters from the photos.
These holsters came with a substantial trade-in of Smith & Wesson Model 65
– 3 inch barrel revolvers. The Smith & Wesson factory number is
#S&WH06. Gould & Goodrich factory designation, possibly visible in the
photo, is HZL 33. These are excellent quality, genuine smooth black leather,
right-hand low profile lined holsters made specifically for Smith & Wesson
K-frame revolvers with 3 inch barrels. They fit, for example, the Smith &
Wesson Models 10, 13, 64, and 65 with 3 inch barrels. They will also fit
similarly proportioned Tauruses and Rossis; not only the Taurus 66 / 608 type,
but also the Big Bore Trackers. We have used them for 2 inch, 2 ½ inch, and
even 4 inch models. The adjustable sight K frames will fit with some forcing
and difficulty; but since this is genuine leather, the material will eventually
stretch. The double front belt slots allow for variable cant wear. We consider
these holsters to grade Good Condition. They have been used enough to pick up
some scuffs that affect less than 30-40 percent of their surface area; or they
are well broken in and sometimes have light short cracks at the edge of the
belt slots. All of them are functional and serviceable. These are not easy to
find, and when a person finds a new holster of this quality, prices often
approach $100 apiece. We’re offering them one at a time, however, each for only $11.95
GL176-219
Holster G&G
S&W/Taur/Ruger Conceal VG-Exc Cond
Winning buyer will receive one of the holsters from the same
grading batch these came from. These holsters came with a substantial trade-in
of Smith & Wesson Model 65 – 3 inch barrel revolvers. The Smith &
Wesson factory number on the holster is #S&WH06. Gould & Goodrich
factory designation, possibly visible in the photo, is HZL 33. These are
excellent quality, genuine smooth black leather, right-hand low profile lined
holsters made specifically for Smith & Wesson K-frame revolvers with 3 inch
barrels. They fit, for example, the Smith & Wesson Models 10, 13, 64, and
65 with 3 inch barrels. We have used them for 2 inch, 2 ½ inch, and even 4 inch
models. The adjustable sight K frames and even many longer-frame Rugers,
Tauruses, and Rossis will fit with some forcing and difficulty; but since this
is genuine leather, the material will eventually stretch. The double front belt
slots allow for variable cant wear. We consider this holster to grade Very Good
to Excellent Condition. It has been used only enough to soften its stiffness,
and scuffing and contact evidence affect only 10 to 15 percent of its surface
area by our estimate; the photo, however, should allow prospective owners to
grade finish for themselves. Since the Models 13 and 65 are discontinued,
holsters like this one are not easy to find, and when a person finds a new
holster of this quality, prices often approach $100 apiece. We’re offering them
one at a time, however, each for only $19.95
GL080-099
Holster G&G
S&W/Taur/Ruger Conceal Black Lined Leather Brand New
Winning buyer gets the holster
from the photo or one of its dozen-some-odd identical mates that we were
extremely lucky to find in one of our distributor warehouses. The Smith &
Wesson model 65 in the holster is not, of course, included; it is simply a
mannequin to show size. These holsters come in their original Smith &
Wesson bulk bag with #S&WH06 bar-coded label. Gould & Goodrich factory
designation, possibly visible in the photo, is HZL 33. These are excellent
quality, genuine smooth black leather, right-hand low profile lined holsters
made specifically for Smith & Wesson K-frame revolvers with 3 inch barrels.
They fit, for example, the Smith & Wesson Models 10, 13, 64, and 65 with 3
inch barrels. They will also fit similarly proportioned Tauruses and Rossis;
not only the Taurus 66 / 608 type, but also the Big Bore Trackers. We have used
them for 2 inch, 2 ½ inch, and even 4 inch models. The adjustable sight K
frames will fit with some forcing and difficulty; but since this is genuine
leather, the material will eventually stretch. The double front belt slots
allow for variable cant wear. All these are brand new with their original bulk
packaging. These are not easy to find, and when a person finds a holster of
this quality, prices often approach $100 apiece. We’re offering them one at a
time, however, each for only $39.95
GL049-059
Holster G&G
S&W/Taur/Ruger Federal Man Bucheimer 1970s VG
One of the most popular, and at
the time considered most advanced, duty holsters from the 1970s, this genuine
black smooth leather Federal Man model holster is high ride and fast draw. It
is suitable for both plainclothes work and standard police duty, not to mention
just being a good serviceable holster. The extra-high thumb break paddle
enabled lightning-speed drawing of the weapon, hence their name and popularity;
and the belt slot is wide enough to fit a 2 ¼ inch Sam Browne Duty Belt – yet
tight enough for plainclothes belts. These are good, serviceable holsters. We
consider the lot to be in Very Good or better condition, with 70 to 75 percent
of their finish unaffected by scuffing. All the straps are tight and operable,
and none of them are unduly stretched. The closeup photo shows the worst
scuffed specimen. For our shoppers who are more interested in their S&W
revolvers’ collectability, these are period appropriate for Pinned and Recessed
K Frame Smith & Wessons made in the 1960s to early 1990s as well as for
early L Frames. They will also fit similarly proportioned Tauruses and Rossis;
not only the Taurus 66 / 608 type, but also the Big Bore Trackers. Own one for only $ 16.95
GL101-108
Holster SW/Taur G&G Paddle 2-3 in VG
Mechanically and fit-wise, these
genuine Gould & Goodrich Leather Paddle holsters are in Excellent
condition. Factory number on the paddle itself is ODU, and 33/0306 on the
holster body. This holster is for right hand shooters; and the paddle feature,
of course, allows for easy removal and wear installation since no belt looping
is required. The straps are tight, the fit is tight as the Model 65-5 shows,
and the paddle itself is original stiffness and not worn. These particular
holsters simply have some contact wear on its outside portion that affects more
than 20 percent of the glossy surface area. The holsters in the photo are from
the same grading batch that the buyer will receive one of. These holsters are
made for 3 inch K-Frame Smith & Wesson models 10, 13, 19, 64, 65, and 66. They
will also fit similarly proportioned Tauruses and Rossis; not only the Taurus
66 / 608 type, but also the Big Bore Trackers. We have customers who have used
them for Rugers, Rossis, and Tauruses. Own one of these fine, now-discontinued
holster for one of the greatest revolver series ever for only $39.95
GL110-113
Holster G&G Paddle 2-3 in Med Frame
Excellent Cond
Photo
shows 2 representatives out of a lot of 7 holsters that we recently acquired.
Mechanically and fit-wise, these genuine Gould & Goodrich Leather Paddle
holsters are all in Excellent condition. Factory number on the paddle itself is
ODU, and 33/0306 on the holster body. These holsters are for right hand
shooters; and the paddle feature, of course, allows for easy removal and wear
installation since no belt looping is required. None of the holsters, including
the two shown in the photo, have more than 10 percent of their surface area
affected by light scuffing. The straps are tight, the fit is tight as the Model
65-5s show, and the paddles themselves have their original stiffness and are
not worn. These holsters are made for 3 inch K-Frame Smith & Wesson models
10, 13, 19, 64, 65, and 66. They will also fit similarly proportioned Tauruses
and Rossis; not only the Taurus 66 / 608 type, but also the Big Bore Trackers. We
have customers who have used them for Rugers, Rossis, and Tauruses. Own one of
these fine, now-discontinued holsters for one of the greatest revolver series
ever for only $46.95
GL117-131
Holster G&G Paddle 2-3 in Med Frame
Near Mint Cond
Photo
shows 2 representatives out of a lot of 15 holsters that we recently acquired.
Mechanically and fit-wise, these genuine Gould & Goodrich Leather Paddle
holsters are all in Excellent condition. Factory number on the paddle itself is
ODU, and 33/0306 on the holster body. These holsters are for right hand
shooters; and the paddle feature, of course, allows for easy removal and wear
installation since no belt looping is required. None of the holsters, including
the two shown in the photo, have more than 5 percent of their surface area
affected by light scuffing. The straps are tight, the fit is tight as the Model
65-5s show, and the paddles themselves have their original stiffness and are
not worn. These holsters are made for 3 inch K-Frame Smith & Wesson models
10, 13, 19, 64, 65, and 66. They will also fit similarly proportioned Tauruses
and Rossis; not only the Taurus 66 / 608 type, but also the Big Bore Trackers. We
have customers who have used them for Rugers, Rossis, and Tauruses. Own one of
these fine, now-discontinued holsters for one of the greatest revolver series
ever for only $49.95
GL040-059
Holster G&G
Paddle 2-3 in Med Rev New Unissued
Winning buyer gets the holster
in the photo, or one of its 4 identical mates that we had in stock at press
time. The Model 64-8 is not, of course, included. This is highest quality
US-made gunleather from Gould & Goodrich, one of the oldest and most
deservedly respected names in firearms accessories. G&G number is 33 / 4605
on the holster reverse, and ODU on the reverse suede material. The gun model is
basically discontinued; but since we have several dozen of them and located
some of our Yankee friends with some of these fine holsters in stock, we
decided to stock a few and offer them for sale. These will fit, of course,
Smith & Wesson K Frame Revolvers in 2 inch to 3 inch barrel lengths. They
will also fit similarly proportioned Tauruses and Rossis; not only the Taurus
66 / 608 type, but also the Big Bore Trackers. Holsters like this normally sell
in our area for upwards of $75 - $100 apiece; however, we’re offering this
genuine G&G Paddle Holster for only $59.95
GL0351
Holster: Alamo Lined
Leather for 4 inch Med Rev Exc
This is genuine leather, with
soft glove-leather lining, manufactured 2-3 decades ago by Alamo Leather
Company, before the fashionable exact-molded holster came into vogue. This
holster is for a right-handed shooter. Lining is dyed black, and these were a
bit more expensive than the Bob Gibbs holsters of similar construction and
quality that we used to sell in the 1970s and early 1980s. In lieu of a blue
hinged box, this holster would be an appropriate addition to any Smith &
Wesson or similar K-frame size revolver in 3 or 4 inch barrel manufactured
during the Nixon or Carter years. It will also fit similarly proportioned
Tauruses and Rossis; not only the Taurus 66 / 608 type, but also the Big Bore
Trackers. This holster is in Excellent Condition, with 90 to 95 percent of its
original finish remaining by our estimate. The holster in the photo is the
exact one that the buyer will receive. Own this fine old holster for only $ 26.95
GL0352
Holster Belt: Alamo
Lined Petite Extra-Small Duty Belt 30 in Waist VG
This holster came to us with a
couple of holsters and some ammunition from the 1970s and 1980s, so we assume
it is about 25-30 years old. It is in Very Good Condition, the only precluding
factor for Excellent is the added-on .38/.357 cartridge loops. Note that there
is some light cracking in the center where the loops were moved or modified
long ago. Waist size is 30, and so marked. This is the kind of belt a few of us
could wear, but not many. It is a very nice, very substantial belt. Replacement
price on similar Sam Browne type rigs of this quality grade is upwards of $100
nowadays; we’re offering this one, however, for
only $
29.95
GL032
Holster: Leather
Ankle Holster Ber 21, Small Auto Exc w/o Calf Strap
The only detraction to this
genuine Viking Leather Company leather ankle holster is something that most of
us consider an asset: that pesky, useless-to-us, and garter-like calf extension
has been neatly removed. The pistol will rest with sufficient stability atop
most high or medium-topped shoes, and certainly so in Acme work boots, as our
photographer can attest. This holster has seen little use; and although the
strap and base are synthetic laminate, the holster body itself is real Mexican
cow. The ankle base is comfortably sheepskin-lined, and there are 10-12 inches
of strap adjustment capability. The holster itself is unlined, so we recommend
a liberal internal application of Rig or Remington gun grease on its interior.
It is specifically molded for the Beretta 21 or 950 pistol, but will fit
several other small autos. Our photographer has even used one for a Colt
Mustang .380. Replacement price on this fine holster is upwards of $60.00; yet
we’re offering this one for only $
36.95
GL033
Holster Rig: Western
Rig for 4-6 in .22, 34-36 in Waist VG-Exc
We hasten to point out two
things about this top quality Mexican Western Rig. First is that its chief
detraction is extensive wrinkling to the leather of the belt tongue only.
Second is that the average thickness of the belt and holster is .170, quite
substantial and heavy. While we have included several photos on our home venue,
we consider it to be Very Good, and if it were a gun, like the 1956 Ruger Flat
Top Flat Latch Single Six it came with, we’d grade it at 80 to 85 percent. This
is an excellent quality rig, and our photographer really wanted it, but his
girth precluded his cooptation of this prize piece of gunleather. We reminded
him that he works for food, not merchandise. The holster body will accommodate
most Single Action .22 Revolvers, all the way from our aforementioned 1956
Ruger all the way up to our 1958 High Standard Sentinel 6 inch, whose placement
would be more irreverent since it is a double action revolver. Rigs like this
normally command prices in the $150 range; we’re offering this one, however, for only $ 83.95
GL034
Holster Luger 1906
Portuguese Army Rod, Tool, Mag Pouch VG-Exc
This genuine leather holster is
Pre-World War II, and fits the 1906 Portuguese Luger in 4 ¾ inch barrel. All the
equipment is in at least Very Good condition by our estimate. The worst
detractions are a crack on the outside section of the oiler cover and one
moderate edge hole on the forward magazine cover flap. The magazine pouch
flap’s tongue has about 30 percent cracky brown showing on that portion only.
Stitching is complete and intact throughout. This holster is part of the
collection of one of the grand old men of our area. Needless to say, this fits
one of the rarest Luger variants. Own this set complete for only $ 219.95
GL035
Holster Safariland
Clarino for 92 Beretta VG-Exc
We are mystified as to how this
holster wound up in rural West Tennessee, since it came in with a civilian
trade. These were issued by notable West Coast State Agencies, but occasionally
one of our local officers use Clarino with their clothing allowance purchases.
This is a genuine patented Safariland model 200 holster for the full-size 5
inch 92 and 96 type Beretta Pistols. It will fit the shorter barrel Centurion
variants as well. This holster is in Very Good condition, with only moderate
contact indications to its suede inner liner and slight inconspicuous
beginnings of cracking to the thumb strap. Replacement price on these is well
over $100 apiece; yet we’re offering this one for
only $
29.95
GL036
Holster SW 5900 Hume
Clarino Exc
Here is a surplus holster from
Tennessee’s Finest, the Tennessee Highway Patrol, from the late 1980s. If it
was issued, it was only for a brief time, because its only detractions are some
pressure marks on the back center plate in the center screw area. Suede lined
interior is barely scuffed from insertion. It will fit any Smith & Wesson
5900 or even 6900 type pistol, and this one was issued for a 5906. The 4000
types will fit as well. Manufacturer is Don Hume Leather Company of Miami,
Oklahoma. Replacement price on this type holster is well over $100.00; we’re
offering this one, however, for
only $
29.95
GL038
Holster Rig Hunter
Leather ca 1960s 6-8 Inch .22 Revolvers
This holster and belt show
considerable oil stain and even some moldy residue on the belt, but the
stitching is intact throughout and the holster is more on the original Old-West
styling than the more popular and more expensive Western Rigs. Note the old-style
double retention back to the holster. Tie-down straps are in Very Good
condition, and appear to be original to the holster. This is an older US made
leather rig by Hunter Company from Westminster, Colorado, whose date of
manufacture we estimate in the 1960s, perhaps a bit earlier. Belt size ranges
from 34 to 38 inches. The .22 Magnum cartridges in the photo are not included,
of course, for shipment through the US Postal Service, although we will donate
them to any eligible walk-in buyers. This holster will accept most any small or
medium frame Revolver, both single and double action, with barrels up to 8
inches long. Own this nice old nostalgic rig for
only $
59.95
GL044
Holster German 1970s
Police Swivel Sig Sauer G-VG
This is, compared to similar
domestic police rigs from the United States, quite a curiosity. It came in with
some of the recent Sig-Sauer pistols imported from Germany, and saw action
patrolling in the old West Germany by one of their police officers. It is in
Very Good, eminently serviceable condition with moderate surface wear. While we
only grade its surface finish at around 70 percent, it is strong and supple.
Own this Reagan-Brandt era holster for
only $
29.95
GL045
Holster Hillbilly Tennessippi
Homemade Constable ca. 1930s
There is no culture shock
whatsoever in our geographic area, the West Tennessee Hills, that extend
roughly from the Kentucky Line down south of Tupelo. This is an early, probably
Depression-era, invention of one of our lawmen, probably a District Constable
or Railroad Guard enlistee. It appears to fit both a medium frame Smith or Colt
Revolver, or even a 1911 type pistol. Note the low-slung custom holster
extension, likely an early tactical innovation against moonshiners who had not
paid their protection fees. Own this genuine piece of hillbilly art for only $ 39.95
GL046
Leather S&W Blue
Box 1970s 109W Knife Case Mint with Papers
The box is, of course, more
valuable than the scabbard itself. This 4 inch interior knife pouch is a bit
too short for a 39 or 1911 Magazine, but the accessory model designation is
109W, probably for one of the Smith & Wesson knives marketed so forcefully
from Springfield, Massachusetts in the 1970s and 1980s. The scabbard hang tag
is still attached, and the factory pink warranty card, attention Knife
Department, is included. Box label reads 40428 in original hand script and 6060
stamped in red ink. The blue hinged box is a prize on its own merit. Own this
mint condition scabbard and box for
only $ 33.95
GL051
Holster G&G
Security 4 in Rev LH VG Bk BW Leather 1970s
This genuine, All-American Gould
& Goodrich Security Duty Holster was manufactured sometime between about
1975 and the Auto Pistol takeover in the mid to late 1980s. It has served the
citizens of Upstate New York well in its brief career. Weapon retention has
always been a problem with Police Officers, and this type holster prevents
that, only permitting drawing of the K or L Frame Smith & Wesson Revolvers
in a forward motion. This Black Basketweave Left Hand holster is in Very Good
Condition, with only moderate contact wear to its surfaces. All the plate
screws are intact, the plate retains full rigidity, and stitching is sound
throughout. Thumb strap and snaps are sound with no abnormal cracking, all are
functional. This is a heavy duty holster that will fit any belt up to the 2 ¼
inch Sam Browne size. It is solid leather, black bastketweave. G&G Model
number is EEZ 594W LH. This type holster will fit a variety of 3 or 4 inch Revolvers,
including Charter Arms, Ruger, Colt, Rossi, and Taurus, as well as Smith &
Wesson. Replacement cost on these now exceeds $100 apiece. Own the one in the
photo, however, for only $ 29.95
GL052
Holster G&G
Security 4 in Rev VG Black Leather 1970s
This genuine, All-American Gould
& Goodrich Security Duty Holster was manufactured sometime between about
1975 and the Auto Pistol takeover in the mid to late 1980s. It has served the
citizens of Upstate New York well in its brief career. Weapon retention has
always been a problem with Police Officers, and this type holster prevents
that, only permitting drawing of the K or L Frame Smith & Wesson Revolvers
in a forward motion. This type holster will fit a variety of 3 or 4 inch
Revolvers, including Charter Arms, Ruger, Colt, Rossi, and Taurus, as well as
Smith & Wesson. This Smooth Grain Leather holster is in Very Good
Condition, with only moderate contact wear to its surfaces. All the plate
screws are intact, the plate retains full rigidity, and stitching is sound
throughout. Thumb strap and snaps are sound with no abnormal cracking, all are
functional. This is a heavy duty holster that will fit any belt up to the 2 ¼
inch Sam Browne size. G&G Model number is B501 er. Replacement cost on
these now exceeds $100 apiece. Own the one in the photo, however, for only $ 19.95
GL053
Holster Bill Jordan
Border Patrol Hume LH 4 in Rev VG-Exc
This is the classic Bill Jordan
design Border Patrol type low-ride duty holster in black smooth leather,
manufactured by Don Hume company of Miami, Oklahoma. The main detracting area
of this holster is not visible with a gun in it: it has some cylinder edge
scuffing on the inside area, just enough to soften the unlined interior surface
and diminish wear effect on blue revolvers. This one is the plain strap type of
course, and it approaches Excellent Condition. It has seen very little wear in
its brief and sporadic career serving the good citizens of Upstate New York.
This holster was manufactured some time in the late 1970s or early 1980s,
before the Semi-auto craze swept Law Enforcement and high capacity took the
place of marksmanship. This holster is specifically designed for K frame 4 inch
Smith & Wessons, but it will also fit L frames and even N frames with some
break-in period allowance. This type holster will fit a variety of 3 or 4 inch
Revolvers, including Charter Arms, Ruger, Colt, Rossi, and Taurus, as well as
Smith & Wesson. This holster is not only an attractive, eminently
serviceable holster; it will serve admirably in lieu of the blue 2-piece box to
enhance the value of most Revolvers from the 1960s through 1980s. Replacement
price on this holster, if indeed a person can even find one, approaches $100
nowadays, since it’s genuine 100% American cow, not nylon or plastic. Note that
it is for a Left Hand Shooter. This is a real holster that honors a real Police
Marksman. Own it for only $ 39.95
GL054
Holster 4 in Swivel
Patrol Type Bucheimer Guardsman 1970s Exc
Since this Guardsman swivel-type
duty holster has only moderate wear, and since 90 percent or more of its
original finish is intact, we consider it to be in Excellent Condition. This is
vintage 1960s and 1970s styling from the heyday of the J.M. Bucheimer Company
of Frederick, Maryland, immaculately preserved. The low-slung thumb break body
of the holster unsnaps and swivels to allow Patrol Officers to be seated
comfortably without bending their holster. While this holster was specifically
designed for the Medium Frame Smith & Wessons, it will fit a variety of 2 ½
to 4 inch revolvers, including Charter, Colt, Rossi, Ruger, and Taurus as well
as Smith & Wesson N Frames, with some stretching and break-in allowance.
This holster was definitely state of the art during the Nixon Days, and it is still
eminently serviceable. It is genuine American Leather, plain black, unlined,
and it will not produce excessive wear on a stainless revolver, or even a blue
one if its interior is kept well lubricated. It will also serve as an excellent
stand-in for a blue Smith & Wesson Box, a brown Colt Box, or a black and
yellow Ruger Box. Replacement price nowadays for this type holster, if a person
can even find one, would exceed $125.00. We’re offering this one, however, for only $ 59.95
GL055
Holster Mixson 4in
Rev LH Border Patrol 1970s
This is an excellent holster
manufactured in the heyday of the police service revolver of the 1970s, perhaps
early 1980s, before the Semi-auto scattergun fad swept up both Law Enforcement
and Civilian Defense markets to the grave detriment of marksmanship. This duty
holster is similar to the ones favored by that great Texan and Police Marksman
Bill Jordan.It is a low-ride, border patrol type with leather strap, and the
holster is solid throughout despite moderate wear to its edges and inside main
plate. Wrinkling effect is natural and attractive; this holster is reasonably
pliable yet strong and thick throughout. We rate it as Very Good, with some 80
percent of the original finish remaining. While it was designed for Medium and
Large Frame Smith & Wessons, it will also accept many Charters, Colts,
Rossis, Rugers, and Tauruses. Not only is this Model 82 / 408 Holster,
manufactured by Mixson Leathercraft in Miami, FL, eminently serviceable; it
will also serve to enhance the value of period revolvers in absence of a
two-piece blue Smith & Wesson Box. Own this fine, notable Mixson Holster for only $ 29.95
GL056
Holster Bianchi 99A
Border Patrol .45 Exc BBW
Sadly, this is a discontinued
item in a market literally awash in plastic and nylon. This is the real thing,
the Bianchi 99A Border Patrol Holster in genuine suede-lined Black Basketweave
Leather, 100% American Cow, not Chinese nylon. This one is for the Southpaw
Shooter, and it is in Excellent Condition with no conspicuous wear to its outer
surfaces, and minimal indentation from light duty insertion and drawing. This
one fits any 1911 Type Government Pistol and even Browning Hi-Power Types. It
has two snap positions on the thumb strap. We do not believe there are any of these
left in distribution channels in Black Basketweave. Replacement price on this
holster, if a person can even find one, is upwards of $150.00. We’re offering
this one, however, for only $ 79.95
GL057
Holster Safariland
200 S&W 4500 BW Exc
This is what Safariland used to
call a level II security duty holster, the model 200 / 3596 to fit any Smith
& Wesson 645 or 4500 Type Metal Frame Pistol. Composition is synthetic, but
vastly superior in strength and appearance to the current crop of molded plastic
and flimsy nylon holsters on the market. Since the Safari-laminate is pretty
much impervious to contact or weathering, the outside surface of this holster
is in perfect condition. The suede-lined inside shows moderate surface wear,
but the suede is supple and full. This 200 is, as the photos show, for the Left
Hand shooter. Replacement price on this fine holster is well over $100 in our
area; we’re offering this one, however, for
only $
49.95
GL058
Holster Safariland
4500 S&W Crimson Trace Slotted
Here is another in a series of
innovations from Safariland in Ontario, California, a 210 model Level II
Security Duty holster that will fit a Smith & Wesson 4500 or 1000 size .45
or 10mm Pistol outfitted with Crimson Trace Laser Grips. This holster is several
cuts above most molded nylon or plastic on the market nowadays, constrcted from
the near-indestructible Safari-laminate material, with a heavy 3-screw
retention/loop plate on its body side. This holster shows only moderate wear on
its surface and on the edge of the trigger area of its suede lining. The
principal detraction is a suface scuff on the outside muzzle area. This holster
requires some study to operate, and most departments that issue them provide
the training. Safariland will supply instruction material to any Law
Enforcement Agency with a letterhead request. Replacement price on this holster
is upwards of $100, even on a wholesale mail-order basis. We’re offering it,
however, for only $ 39.95
GL059
Holster Gun Mate SW 4566
Walther 88 Mint in Pkg
Here is a very attractive smooth
glossy leather holster to fit any 4 ¼ inch, Commander Size, Smith & Wesson
4500 or 1000 type Pistol, including the 4516, 4566, 1066, and 1076. Since all
the pistols are stainless, the unlined interior surface will not be
detrimental. This is top quality Italian leather manufactured by Old World
Leather and imported by Gun Mate in Oregon. It is in it original package, and
insertion evidence is negligible. Replacement price on this holster in our area
is well over $50.00. We’re offering this one, however, for only $ 26.50
GL060
Holster Strong Model
930 S&W 3900/6900 Exc
Here is a mahogany or briar
coloured holster that will fit most compact Smith & Wesson 3900 or 6900
Pistols, and it is also a decent fit for the Kel-Tec P9F Pistol. It is a
sculpted smooth surface, with soft textured interior, in Excellent Codnition
with minimal surface wear. It is a perfect fit for the very popular Smith &
Wesson 3913, 3914, and 908 metal frame pistols. This holster is the
flat-sitting pancake style, with three belt slots for two different forward
cant positions for the Right Hand Shooter, and a distinct possibility of
behind-the-back wear for Southpaws. Manufacturer is Strong Leather Company, one
of the premier purveyors of real American Cow holsters. Replacement price on
this holster in our area is upwards of $75.00; we’re offering this one,
however, for only $ 36.50
GL061
Holster G&G 4 in
Rev Pancake Holster
Here is a genuine American cow holster
manufactured by Gould & Goodrich, one of the premier names in the U.S.
Holster Market. This one is specifically manufactured for the Smith &
Wesson K Frame 4 inch, but since it is real leather, it can be adapted to a
variety of revolvers, even the L and N frames, not to mention several models in
Charter, Colt, Rossi, Ruger, and Taurus. This holster is in Excellent Condition
with light contact scuffs affecting 10 percent or less of its surface by our
estimate. We only have one of these, and the buyer will receive the exact
holster in the photo. Inner surface is unlined, but has a soft texture that
will serve well with stainless and even blue revolvers if that interior is kept
lubricated. Manufacturer number is B738-34 and so marked. Replacement price on
this holster is over $50.00 in our area; we’re offering this one, however, for only $ 31.95
GL062
Holster Safariland
SSIII S&W 5900 VG-Exc Cond
Here is a specimen of
Safariland’s Maximum Security Duty Holster, the 070 / 1298, also known as the SSIII.
It is black basketweave, Safari-laminate body construction with suede-lined
interior. It fits the S&W 5900 type and also most 4000 type metal frame
pistols. Exterior surface wear is very light, and the suede lining inside shows
moderate wear but all the lining is intact and the holster is eminently
serviceable. Note that the finish is black basketweave. Replacement price on
this holster is upwards of $150.00, and most Agencies that issue these holsters
also furnish training for their use. Safariland will also furnish instructional
information for any Department that requests it. Own this fine holster for only $ 49.95
GL063
Holster Hume JIT
Slide all 1911 Type Mint in Pkg
This minimal size, minimally
priced – for leather – holster is manufactured by Don Hume Company in Miami,
Oklahoma, of 100 percent American Cow. Since it is open top, it fits any 1911
type Pistol, from the Norinco to the Kimber Ultra Carry. It’s the Model 10 JIT
Hume plain molded brown unlined, and this one is in mint condition in its
original package. Replacement price on this holster in our area is upwards of
$40.00; we’re offering this one, however, for
only $21.95
GL064
Holster Safariland
518 Paddle for S&W 4566 / 1066
Here is a very attractive smooth
glossy Safari-laminate holster to fit any 4 ¼ inch, Commander Size, Smith &
Wesson 4500 or 1000 type Pistol, including the 4516, 4566, 1066, and 1076. It
is manufactured, of course, by Safariland in Ontario, California. The suede
lined outside, smooth laminate inside of the paddle provides for both easy of
installation and stable retention during wear. The paddle will fit inside the
pants or under a belt loop. This holster is in its original package with
instruction manual, and it is completely intact. The laminate surfaces,
however, have a dozen or so cracks that are not conspicuous except on close
inspection, and there is some of the smooth surface missing at a couple of the
edge points. Thre is some crumbling effect to the edges, so the holster may
have been exposed to extreme heat or cold. The holster is serviceable
nevertheless. Current replacement price on this holster in our area is upwards
of $75. We’re offering this one, however, for
only $19.95
GL064-065
Holster Strong
Leather 930 S&W 3-4 in K VG-Exc
Here is a pair of very nice
Strong Leather Company holsters, Model 930 / 8, to fit any Smith & Wesson K
frame revolver with 2 inch to 4 inch barrel. They are really made for the 3
inch revolvers, but we have personally carried 4 inchers in this type holster
with good effect. Note the 3 slots for variable position forward cant carry.
Neither holster is lined, but both are just broken in enough and smooth enough
internally that they will not damage the finish on even a blue revolver if they
are kept properly lubricated. These fine holsters will fit other brands besides
Smith & Wesson – several sizes among Charter, Colt, Rossi, Ruger, and
Taurus Revolvers as well. Since both these holsters have only moderate surface
scuffing and edge wear indications, we rate them both as Very Good to
Excellent. Own one of the holsters in the photo for
only $
19.95
GL066
Holster Tru-Fit
Vintage 1940s for Colt 6 in
This old holster came to us with
a 1940s Colt Officer’s Model Target .22 that we have advertised elsewhere. It
is in Good Condition, as opposed to Poor or Excellent, with substantial
cracking but substantial strength to the strap, and surface scouring that
affects about 40 percent of the surface. It has a 2 inch separated crack near
the hammer area, and separation for about 3 inches of the stitching from the
muzzle area back. There is one small hole where the .22’s muzzle wore through.
That said, this holster has plenty of character and would enhance the value of
any Colt Revolver, or 1920s to 1950s period revolver, for that matter. It is
branded Trufit across its flap strap, as the photos show; and is model marked
900 for OP 38 6, for any Official Police Size .38 with a 6 inch barrel. It
served well in the hollows of central Pennsylvania for a now-deceased squirrel
hunter, and still has plenty of service in it as a showpiece or better,
addition to a Colt Showpiece. Own it for
only $ 29.95
GL067
Holster 1920s Leather
4 in Revolver Good Cond
This old holster came to us from
Northeast Mississippi with a collection of Smith & Wesson Hand Ejectors and
M&P Revolvers. It is in Good Condition, with about 70 percent of its
original brown finish intact. Strap has extensive wear, but is pliable and
thick. The belt strap is homespun replacement with cotton stitching. Note the
original brass stud that is still intact. This holster would enhance most any
pre-World War II Revolver, and it is in good enough condition to even be
serviceable in the field again. We estimate it was manufactured in the 1920s,
given the average age of the revolvers that it came with. Own it for only $ 29.95
GL068
Holster G&G LH 4
in Lined Exc
Here is Gould & Goodrich’s
answer to the Bianchi #5 High-ride holster, the #708 34 BLH, Line Black Leather
Left Hand shooter holster for 4 inch Revolvers. This one is in Very Good to
Excellent Condition, with light surfacecontact wear on its exterior and very
light natural wrinkled grain in areas. The suede lined interior is only
moderately stained, and the lining is Excellent as far as being completely
intact. The belt slot is two position; that is, it will accommodate a 2 inch
belt or even a 1 inch belt with its slotted belt slide. Replacement price on
this type holster is upwards of $75.00 in our area; we’re offering this one,
however, for only $ 29.95
GL069
Holster Set CSA Rev,
Belt, Buckle, Holster, Pouches
Here is a mint condition
complete set of correct and authentic looking leather in brown leather
appropriate for Civil War Enthusiasts, Reenactors, or Collectors. All Five
Items are in Mint Condition and have not been used. The top grain leather belt
with brass CS belt buckle is one that will fit even fat Southern Boys like our
editor who are pushing it in size 38 pants. Also included are a bayonet holder
and CS-marked ammunition pouch. The centerpiece, of course, is a CS marked
holster that will accommodate most Remington and Colt Type Percussion
Revolvers, or even a 6 ½ inch Ruger Blackhawk Single Action. Holster is for
cross-draw position for right hand shooters. All items are made in the United
States by Triple K Leather in the San Diego area. Replacement price on this
entire set in our area is well over $200.00; we’re offering the complete set,
however, for only $ 119.95
GL070
Holster Set US Civil War
Rev, Belt, Buckle, Holster, Pouches
Here is a mint condition
complete set of correct and authentic looking leather in black leather
appropriate for Civil War Enthusiasts, Reenactors, or Collectors. All Five
Items are in Mint Condition and have not been used. The top grain leather belt
with brass US belt buckle is one that will fit even fat Southern Boys with 30
percent Unionist Ancestry like our editor who are pushing it in size 38 pants.
Also included are a bayonet holder and US-marked ammunition pouch. The
centerpiece, of course, is a US marked holster that will accommodate most
Remington and Colt Type Percussion Revolvers, or even a 6 ½ inch Ruger
Blackhawk Single Action. Holster is for cross-draw position for right hand
shooters. All items are made in the United States by Triple K Leather in the
San Diego area. Replacement price on this entire set in our area is well over
$200.00; we’re offering the complete set, however, for only $ 119.95
GL071
Holster Hunter Type
Leather 8 in Brown Mint
Here is a continuation of the
once cheap, but no longer cheap, plain-jane but genuine leather holsters
produced in such abundance before the advent of nylon during the Reagan era.
This is a mint condition generic leather holster, still American made, by Hunter
Leather Company and marketed by Cabela’s. This one was bought from Cabela’s a
couple of years ago, and it has never been used. It has a reasonably
attractive, very 70s, external appearance, and rough soft leather interior for
minimizing wear to even bright blue revolvers. This one will accommodate
revolvers with barrel lengths up to 7 ½ inches. Holsters like this cost about
$60.00 from Cabela’s, but we’re offering this one for only $ 39.95
GL073
Holster Set CSA Rev
LH Holster & Pouches
Here is a mint condition set of
correct and authentic looking leather in brown leather appropriate for Civil
War Enthusiasts, Reenactors, or Collectors. All three Items are in Mint
Condition and have not been used. The centerpiece, of course, is a CS marked
holster that will accommodate most Remington and Colt Type Percussion
Revolvers, or even a 6 ½ inch Ruger Blackhawk Single Action. Holster is for
cross-draw position for left hand shooters, or to make a double set with two
revolvers. Also included are a bayonet holder and CS-marked ammunition pouch.
All items are made in the United States by Triple K Leather in the San Diego
area. Replacement price on this entire set in our area is well over $200.00;
we’re offering the complete set, however, for
only $
69.95
GL074
Holster Set Civil War
LH Holster & Pouches
Here is a mint condition set of
correct and authentic looking leather in black leather appropriate for Civil
War Enthusiasts, Reenactors, or Collectors. Both Items are in Mint Condition
and have not been used. The centerpiece, of course, is a US marked holster that
will accommodate most Remington and Colt Type Percussion Revolvers, or even a 6
½ inch Ruger Blackhawk Single Action. Holster is for cross-draw position for
left hand shooters, or to make a double set with two revolvers. Also included
is a US-marked ammunition pouch. All items are made in the United States by
Triple K Leather in the San Diego area. Replacement price on this entire set in
our area is well over $80.00; we’re offering the complete set, however, for only $ 49.95
GL075
Holster Hunter Type
Leather 8 in Brown Mint
Here is a continuation of the
once cheap, but no longer cheap, plain-jane but genuine leather holsters
produced in such abundance before the advent of nylon during the Reagan era.
This is a mint condition generic leather holster, still American made, by
Hunter Leather Company and marketed by Cabela’s. This one was bought from
Cabela’s a couple of years ago, and it has never been used. It is in its
original packaging. It has a reasonably attractive, very 70s, external
appearance, and rough soft leather interior for minimizing wear to even bright
blue revolvers. This one will accommodate revolvers with barrel lengths up to 7
½ inches. Holsters like this cost about $60.00 from Cabela’s, but we’re
offering this one for only $ 39.95
GL076
Holster Belt Vintage
1930s Good Cond
